From owner-biotechniques@net.bio.net Thu Dec 04 22:00:00 1997
Path: biosci!biosci!not-for-mail
From: psittcsis@aol.com (Psittcsis)
Newsgroups: bionet.journals.letters.biotechniques
Subject: nk cell research
Date: 5 Dec 1997 07:22:56 -0800
Organization: AOL http://www.aol.com
Lines: 7
Sender: daemon@net.bio.net
Approved: MMCCARTHY@BIOTECHNET.COM
Distribution: world
Message-ID: <19971203181701.NAA08451@ladder02.news.aol.com>
NNTP-Posting-Host: net.bio.net

Anyone have any insight as to the fate of NK cells after long term
immunosuppression (chronic states, like transplant patients or AIDS)...please
provide, if you are able.

David Shapiro

dshapir@harthosp.org

From owner-biotechniques@net.bio.net Tue Dec 09 22:00:00 1997
Path: biosci!biosci!not-for-mail
From: MMCCARTHY@biotechnet.com
Newsgroups: bionet.journals.letters.biotechniques
Subject: BioTechniques 24(1), January 1998
Date: 10 Dec 1997 08:41:23 -0800
Organization: BIOSCI International Newsgroups for Molecular Biology
Lines: 153
Sender: daemon@net.bio.net
Approved: MMCCARTHY@BIOTECHNET.COM
Distribution: world
Message-ID: <01IR06PG2YJ69BVQ3Y@delphi.com>
NNTP-Posting-Host: net.bio.net

BioTechniques 24(1), January 1998
Table of Contents

Benchmarks

Rapid Amplification of Transposon Ends for
the Isolation, Cloning and Sequencing of
Transposon-Disrupted Chromosomal Genes
     E.M. Ribot, F.D. Quinn, X. Bai and J.J.
     Murtagh, Jr.   

Comparative PCR: An Improved Method to Detect
Gene Amplification
     N. Brass, D. Heckel and E. Meese

Adaptor PCR for the Specific Amplification of
Unknown DNA Fragments
     H. Willems

Use of T4 DNA Polymerase to Create Cohesive
Termini in PCR Products for Subcloning and
Site-Directed Mutagenesis
     A.J. Cooney

Amplification of Short Tandem Repeat Loci:
Performance of Different Polymerases and
Radionucleotides
     B. Winnepenninckx and T. Backeljau

Increased Yield of Tri- and Tetranucleotide
Heterospecific Microsatellites from
Unenriched Small-Insert Libraries
     K.D. Makova and J.C. Patton

Vector-Swapping Strategy with an Exonuclease
in Cloning and High Expression of Small PCR
Products
     M. Obara and K. Yoshizato

Universal Amplification of DNA Isolated from
Small Regions of Paraffin-Embedded,
Formalin-Fixed Tissue
     S.W. Faulkner and D.A. Leigh

UV Irradiation of Polystyrene Pipets Releases
PCR Inhibitors
     V. Linquist, C.A. Stoddart and J.M. 
     McCune

Screening for Positive Transfected Clones
with Coexpressed Green Fluorescent Protein
     X. Li, N. Ngo, C. Hou, S. Cunningham, 
     R.B. Zhang, Z. Li and
     C.-C. Huang


Elimination of Internal Restriction Enzyme
Sites from a Bacterial Luminescence
(luxCDABE) Operon
     C.R. Voisey and F. Marincs

Dye-Induced Denaturation of DNA Dissolved in
Water
     B. Shieh, I.-J. Su, W.-J. Chuang and C.
     Li

pBendBlue: Modification of the pBend System
for Color Selectability
     S.J. Sperbeck and G.J. Wistow

Nonradioactive UV Cross-Linking Assay for the
Study of Protein-RNA Binding
     C. Vaquero, Y.-C. Liao and R. Fischer

Higher Sensitivity of Denaturing Gradient Gel
Electrophoresis than Sequencing in the
Detection of Mutations in DNA from Tumor
Samples
     M. Garcia-Delgado, C.J.
     Gonzalez-Navarro, M.C. Napal, C.
     Baldonado, J.L. Vizmanos and A. Gull

Defogging Tissue Culture Lids for Viewing
Cells
     M.G. Price, J.M. Schwartz Ebarb and E.G.
     Frank

Internet On-Ramp
     Cyberspace for Biologists


Short Technical Reports

Comparison of Histologic Stains for Use in
PCR Analysis of Microdissected,
Paraffin-Embedded Tissues
     M.P. Burton, B.G. Schneider, R. Brown, 
     N. Escamilla-Ponce and M.L. Gulley

Coverslip Mounted-Immersion Cycled In Situ
RT-PCR for the Localization of mRNA in Tissue
Sections
     R. Ertsey and L.M. Scavo

Mass Spectrometric Methods for Evaluating
Point Mutations
     J.K. Lewis, J.R. Krone and R.W. Nelson

Fluorescence-Based Protein Footprinting Using
Histidine-Tagged Protein
     G.V. Rajendrakumar and S. Adhya

Novel Vector for Generating RNAs with Defined
3-prime Ends and Its Use in Antiviral
Strategies
     A. Schwienhorst and B.F. Lindemann

Determination of Transgene Copy Number and
Expression Level using Denaturing Gradient
Gel Electrophoresis
     M.D. Ringel, W.F. Schwindinger, M. Saji,
     M.A. Zeiger and M.A. Levine

Adaptation of Standard Spreadsheet Software
for the Analysis of DNA Sequences
     N.R. McEwan and D. Gatherer


Research Reports

Denaturation Fingerprinting: Two Related
Mutation Detection Methods Especially
Advantageous for High G+C Regions
     Q. Liu, B.G. Weinshenker, D.M.
     Wingerchuk and S.S. Sommer   
     
Automated Recording of RNA Differential
Display Patterns from Pig Granulosa Cells
     J. Motlik, J.W. Carnwath, D. Herrmann, 
     V. Terletski, M. Anger and H. Niemann


Product Application Focus

Advantages of a New Taq DNA Polymerase in
Multiplex PCR and Time-Release PCR
     C. Kebelmann-Betzing, K. Seeger, S. 
     Dragon, G. Schmitt, A.
     Moricke, T.A. Schild, G. Henze and B. 
     Beyermann

New Products
Index to Advertisers

From owner-biotechniques@net.bio.net Mon Dec 22 22:00:00 1997
Path: biosci!biosci!not-for-mail
From: BIOSCI Administrator <biohelp@net.bio.net>
Newsgroups: bionet.journals.letters.biotechniques
Subject: BIOSCI/bionet miniFAQ & Fundraiser
Date: 23 Dec 1997 07:06:31 -0800
Organization: BIOSCI International Newsgroups for Molecular Biology
Lines: 233
Sender: daemon@net.bio.net
Approved: MMCCARTHY@BIOTECHNET.COM
Distribution: world
Message-ID: <199712201000.CAA19406@net.bio.net>
NNTP-Posting-Host: net.bio.net

(LAST REVISION: 30-JUL-95)

This BIOSCI "miniFAQ" is designed to answer the questions that come up
the *most frequently*.  The main BIOSCI FAQ (Frequently Asked
Questions) is accessible on the World Wide Web at URL
http://www.bio.net/.

If you can not find an answer to your question in this or other
documentation, the BIOSCI technical support staff answers e-mail
queries sent to

		       biosci-help@net.bio.net

We can only answer questions about the use of the newsgroups and
mailing lists.  We unfortunately do not have the staff to do Internet
information searches or answer scientific questions.  Please post
those to the appropriate BIOSCI/bionet newsgroups.


	Contents:
	--------
	0) BIOSCI NEEDS YOUR SUPPORT!!

	1) Using the WWW to access the BIOSCI/bionet newsgroups.

	2) What to do about "spams," i.e., junk mail, ads, etc.

	3) Examples of subscribing and unsubscribing to the mailing lists.

	4) The BIOSCI user address and research interest directory.


0) BIOSCI NEEDS YOUR SUPPORT!!
------------------------------
BIOSCI's government funding has been expended, and we are now
operating solely from advertising revenue that we have raised from our
Web site at http://www.bio.net/.  We need just a few minutes of your
time to help us serve you.

You can do two important things which will take very little time for
you individually and will immensely help us continue to help you.

First, please use our WWW system at http://www.bio.net/ to access the
archives.  You can post or reply to messages via your Web browser as
described in item #1 below.  Your usage helps attract sponsors. If you
contact any of our sponsors, please be sure to thank them for
supporting BIOSCI. It is critical for them to get this feedback if
they are to continue their sponsorship for the long term.

Second, if you work for a company or organization that provides
products or services of interest to the biology community, please pass
this message on to your marketing or marketing communications
department or other appropriate group.  Please ask them to help
support BIOSCI by sponsoring our Web site and explain the uses and
benefits of the system to the biology community. If they are
interested, they can then contact us for further information at our
tech support address, biosci-help@net.bio.net.


1) Using the WWW to access the BIOSCI/bionet newsgroups.
--------------------------------------------------------
As of 10 December 1995, all BIOSCI/bionet full newsgroups are
accessible through the World Wide Web (WWW) at URL http://www.bio.net.
One can read and reply publicly or privately to both recent postings
and archived messages through one's Web browser if it is configured
properly to send e-mail.  Each newsgroup is equipped with its own WAIS
index.  The main BIOSCI home page also has access to the BIO-JOURNALS
Table of Contents database WAIS index and the BIOSCI user address
database described in another item further below.


2) What to do about "spams," i.e., junk mail, ads, etc.
-------------------------------------------------------
BIOSCI is a set of parallel USENET newsgroups (the "bionet" groups),
mailing lists, and a hypermail archive at URL http://www.bio.net/.
The same postings are distributed on all media (except for a small
number of mailing-list-only groups at net.bio.net).  Unfortunately it
is becoming a despicable practice on the Internet (by a few people out
to make a fast buck) to do automated mass postings to thousands of
newsgroups and mailing lists.  These attempts to grab free advertising
are refered to as "spams" in the usual, somewhat boneheaded, net
terminology.  USENET is more susceptible to this practice, and many
spams originate on the USENET groups and then are passed on to the
mailing lists.  However, spammers also get lists of mailing addresses
and hit these too, so neither medium is immune.

What should you do personally if you get junk mail?
---------------------------------------------------
Just delete it and move on without reading it further.  Filing a
protest is becoming increasingly useless because spammers are often
disguising the addresses where the messages are sent from.  Unless you
really understand Internet mail systems, your attempt at protest by
sending replies to the message will often end up being sent to the
address of an innocent person that the spammer is victimizing.

What can BIOSCI/bionet do to protect its newsgroups?
----------------------------------------------------
The only solution currently available is to moderate the newsgroup.
If this newsgroup is already moderated, then you are in good shape.
Moderation protects the USENET distribution from about 95% of the
spams that are being sent to date and protects the mailing lists
completely.  Moderation means, however, that someone has to take the
time to review each message before it goes out.  We have set up
software here that simply allows the moderator to forward to an
address at net.bio.net messages that (s)he wishes to have distributed.
This takes no more time than that needed to read the message and pass
it on, say about 1 min. per message.

Most newsgroups currently have a discussion leader who is responsible
for their newsgroup.  The discussions leaders and their e-mail
addresses are listed in the BIOSCI Information Sheet which is
available on the Web at http://www.bio.net/.  If a newsgroup is being
hit with too many junk postings, please contact the discussion leader
for that group and see if there is interest in moderating the group.
Please do not assume that by simply posting a complaint to the
newsgroup itself, anyone on the BIOSCI staff will act on your
complaint.  With close to 100 newsgroups to run, the BIOSCI staff has
to rely on the discussion leaders of each newsgroup to report problems
directly to us at biosci-help@net.bio.net.

We will moderate any of our newsgroups if the discussion leader tells
us that the readership of the group wishes to do so and if a moderator
is willing to do the work.  For most BIOSCI/bionet groups, this
entails only a few minutes of work each day.

Moderating a newsgroup will resolve probably 95% of the junk postings
on the USENET distribution.  Unfortunately there are easy ways for
determined spammers to override the moderation mechanism on USENET,
but we can protect our e-mail subscribers from unwanted postings if
the newsgroup is moderated.  You can also access our newsgroups over
the WWW at URL http://www.bio.net.  While this Web interface will not
stop spammers from trying to post to the groups, this will give you
yet another way, besides using USENET news, to keep the junk out of
your personal mail files.  For those of you with local USENET news
systems, the Web interface will also give you faster access to new
newsgroups and recent postings.


3) Examples of subscribing and unsubscribing to the mailing lists.
------------------------------------------------------------------
PLEASE NOTE: The BIOSCI management does NOT act on
subscription/unsubscription requests that are posted improperly to the
newsgroups and mailing lists.  People who do this only bother everyone
on the lists to no avail.  Please be sure to follow the proper
procedures below.

Gory details are in the BIOSCI Information sheets on the Web at
http://www.bio.net.  Below we give an example utilizing the
METHODS-AND-REAGENTS list at both of our two BIOSCI sites:

Users in the Americas and Pacific Rim countries who use the BIOSCI
------------------------------------------------------------------
node at computer net.bio.net:
----------------------------

A) Determine the "listname" which is the <=8 character mail address
                                         ^^^^^^^^^^^^^
   for the group.  These can be found in the BIOSCI Info. Sheet.  For
   the METHODS-AND-REAGENTS group the mailing address is
   methods@net.bio.net.  The listname is the portion of the address to
   the left of the @ sign, i.e., "methods".  The listname is used with
   the "subscribe" and "unsubscribe" commands illustrated below.

B) Mail all commands in the body of a mail message addressed to
   biosci-server@net.bio.net.  Do NOT send commands to the newsgroup
   posting addresses!  Leave the Subject: line blank, any text on it
   will be ignored.

C) In the body of your message put one or more of the following
   commands with an "end" command on the last line, e.g.,

   subscribe methods
   unsubscribe methods
   end

   Do NOT put your e-mail address or other text on these lines.  The
   server only allows you to cancel your subscription if the address
   on your mail header matches the address on our mailing list.
   Please ask for help at biosci-help@net.bio.net if your address has
   changed, e.g., if you know you are on the list but the server tells
   you that you are not a member.


Users in Europe, Africa, and Central Asia who use the BIOSCI node at
--------------------------------------------------------------------
computer daresbury.ac.uk (also known as dl.ac.uk):
-------------------------------------------------

To subscribe and unsubscribe to/from the BIOSCI lists, you need to
specify the full USENET newsgroup name with "bionet-news." prepended.
The USENET newsgroup names are listed in the BIOSCI Information sheet
on the Web at http://www.bio.net/.  For the METHODS-AND-REAGENTS list
the USENET newsgroup name is bionet.molbio.methds-reagnts, thus the
appropriate commands are

    sub bionet-news.bionet.molbio.methds-reagnts

    unsub bionet-news.bionet.molbio.methds-reagnts

These commands are included in a message addressed to mxt@dl.ac.uk,
NOT to the newsgroup mailing addresses.  As usual, include the text in
the body of the message as text on the Subject: line is ignored.

To unsubscribe from all the lists at the UK node, use

    unsub bionet-news

Please note that if the address in the list is different than the one
in your mail message header, you will not be able to unsubscribe by
this method. If you have problems, please mail biosci@daresbury.ac.uk.


4) The BIOSCI user address and research interest directory.
-----------------------------------------------------------
Please take this opportunity to add your name, address, and research
interest information to the BIOSCI User Address Database if you have
not already done so.

You can fill out the address form directly through our Web page at URL
http://www.bio.net/adrform.html.

The address database is reindexed nightly for WWW access (the URL is
http://www.bio.net/).  If you are not directly on the Internet but can
reach it by e-mail, please use our waismail server to access the user
directory.  waismail use is described above.  You can also request a
user address form by e-mail from biosci-help@net.bio.net.

Please check your database entry from time-to-time to see if your
address information is still up-to-date.  Because of our limited
personnel resources, we ask that you resubmit a *complete* form to
revise your entry; we only replace complete entries and do not have
resources to edit old forms.


