BIOSCI miniFAQ, ver. 14-DEC-95

BIOSCI Administrator biohelp
Wed Jan 3 05:00:37 EST 1996


This BIOSCI "miniFAQ" is designed to answer the questions that come up
the *most frequently*.  The main BIOSCI FAQ (Frequently Asked
Questions) is accessible on the World Wide Web at URL

	1) Using the WWW to access the BIOSCI/bionet newsgroups.

	2) What to do about "spams," i.e., junk mail, ads, etc.

	3) Examples of subscribing and unsubscribing to the mailing lists.

	4) The BIOSCI user address and research interest directory.

1) Using the WWW to access the BIOSCI/bionet newsgroups.
As of 10 December 1995, all BIOSCI/bionet full newsgroups are
accessible through the World Wide Web (WWW) at URL
One can read and reply publicly or privately to both recent postings
and archived messages through one's Web browser if it is configured
properly to send e-mail.  Each newsgroup is equipped with its own WAIS
index in addition to the master index for the entire set.  The main
BIOSCI home page also has access to the BIO-JOURNALS Table of Contents
database WAIS index and the BIOSCI user address database described in
another item further below.

2) What to do about "spams," i.e., junk mail, ads, etc.
BIOSCI is a set of parallel USENET newsgroups (the "bionet" groups),
mailing lists, and a hypermail archive at URL
The same postings are distributed on all media (except for a small
number of mailing-list-only groups at  Unfortunately it
is becoming a despicable practice on the Internet (by a few people out
to make a fast buck) to do automated mass postings to thousands of
newsgroups and mailing lists.  These attempts to grab free advertising
are refered to as "spams" in the usual, somewhat boneheaded, net
terminology.  USENET is more susceptible to this practice, and many
spams originate on the USENET groups and then are passed on to the
mailing lists.  However, spammers also get lists of mailing addresses
and hit these too, so neither medium is immune.

What should you do personally if you get junk mail?
Just delete it and move on without reading it further.  Filing a
protest is becoming increasingly useless because spammers are often
disguising the addresses where the messages are sent from.  Unless you
really understand Internet mail systems, your attempt at protest by
sending replies to the message will often end up being sent to the
address of an innocent person that the spammer is victimizing.

What can BIOSCI/bionet do to protect its newsgroups?
The only solution currently available is to moderate the newsgroup.
If this newsgroup is already moderated, then you are in good shape.
Moderation protects the USENET distribution from about 95% of the
spams that are being sent to date and protects the mailing lists
completely.  Moderation means, however, that someone has to take the
time to review each message before it goes out.  We have set up
software here that simply allows the moderator to forward to an
address at messages that (s)he wishes to have distributed.
This takes no more time than that needed to read the message and pass
it on, say about 1 min. per message.

Most newsgroups currently have a discussion leader who is responsible
for their newsgroup.  The discussions leaders and their e-mail
addresses are listed in the BIOSCI Information Sheet which is
available on the Web at  If a newsgroup is being
hit with too many junk postings, please contact the discussion leader
for that group and see if there is interest in moderating the group.
Please do not assume that by simply posting a complaint to the
newsgroup itself, anyone on the BIOSCI staff will act on your
complaint.  With close to 100 newsgroups to run, the BIOSCI staff has
to rely on the discussion leaders of each newsgroup to report problems
directly to us at biosci-help at

We will moderate any of our newsgroups if the discussion leader tells
us that the readership of the group wishes to do so and if a moderator
is willing to do the work.  For most BIOSCI/bionet groups, this
entails only a few minutes of work each day.

Moderating a newsgroup will resolve probably 95% of the junk postings
on the USENET distribution.  Unfortunately there are easy ways for
determined spammers to override the moderation mechanism on USENET,
but we can protect our e-mail subscribers from unwanted postings if
the newsgroup is moderated.  You can also access our newsgroups over
the WWW at URL  While this Web interface will not
stop spammers from trying to post to the groups, this will give you
yet another way, besides using USENET news, to keep the junk out of
your personal mail files.  For those of you with local USENET news
systems, the Web interface will also give you faster access to new
newsgroups and recent postings.

3) Examples of subscribing and unsubscribing to the mailing lists.
PLEASE NOTE: The BIOSCI management does NOT act on
subscription/unsubscription requests that are posted improperly to the
newsgroups and mailing lists.  People who do this only bother everyone
on the lists to no avail.  Please be sure to follow the proper
procedures below.

Gory details are in the BIOSCI Information sheets on the Web at  Below we give an example utilizing the
METHODS-AND-REAGENTS list at both of our two BIOSCI sites:

Users in the Americas and Pacific Rim countries who use the BIOSCI
node at computer

A) Determine the "listname" which is the <=8 character mail address
   for the group.  These can be found in the BIOSCI Info. Sheet.  For
   the METHODS-AND-REAGENTS group the mailing address is
   methods at  The listname is the portion of the address to
   the left of the @ sign, i.e., "methods".  The listname is used with
   the "subscribe" and "unsubscribe" commands illustrated below.

B) Mail all commands in the body of a mail message addressed to
   biosci-server at  Do NOT send commands to the newsgroup
   posting addresses!  Leave the Subject: line blank, any text on it
   will be ignored.

C) In the body of your message put one or more of the following
   commands with an "end" command on the last line, e.g.,

   subscribe methods
   unsubscribe methods

   Do NOT put your e-mail address or other text on these lines.  The
   server only allows you to cancel your subscription if the address
   on your mail header matches the address on our mailing list.
   Please ask for help at biosci-help at if your address has
   changed, e.g., if you know you are on the list but the server tells
   you that you are not a member.

Users in Europe, Africa, and Central Asia who use the BIOSCI node at
computer (also known as

To subscribe and unsubscribe to/from the BIOSCI lists, you need to
specify the full USENET newsgroup name with "bionet-news." prepended.
The USENET newsgroup names are listed in the BIOSCI Information sheet
on the Web at  For the METHODS-AND-REAGENTS list
the USENET newsgroup name is bionet.molbio.methds-reagnts, thus the
appropriate commands are

    sub bionet-news.bionet.molbio.methds-reagnts

    unsub bionet-news.bionet.molbio.methds-reagnts

These commands are included in a message addressed to mxt at,
NOT to the newsgroup mailing addresses.  As usual, include the text in
the body of the message as text on the Subject: line is ignored.

To unsubscribe from all the lists at the UK node, use

    unsub bionet-news

Please note that if the address in the list is different than the one
in your mail message header, you will not be able to unsubscribe by
this method. If you have problems, please mail biosci at

4) The BIOSCI user address and research interest directory.
Please take this opportunity to add your name, address, and research
interest information to the BIOSCI User Address Database if you have
not already done so.

You can fill out the address form directly through our Web page at URL

The address database is reindexed nightly for WWW access (the URL is  If you are not directly on the Internet but can
reach it by e-mail, please use our waismail server to access the user
directory.  waismail use is described above.  You can also request a
user address form by e-mail from biosci-help at

Please check your database entry from time-to-time to see if your
address information is still up-to-date.  Because of our limited
personnel resources, we ask that you resubmit a *complete* form to
revise your entry; we only replace complete entries and do not have
resources to edit old forms.


				Dave Kristofferson
				BIOSCI/bionet Manager

				biosci-help at

More information about the Ageing mailing list