From jason.cockington from gmail.com Tue Oct 6 19:39:22 2009 From: jason.cockington from gmail.com (Leviathan) Date: Wed Oct 7 11:37:00 2009 Subject: [Zbrafish] in situ robots Message-ID: <07da2a20-2545-4b5f-a451-b624f656789f@w37g2000prg.googlegroups.com> Hi All, i am currently looking at the idea of getting an in situ robot. i was just wondering if people who have used either the BioLane HTI, or the InsituPro VSI could send me some thoughts on whether you are happy with the machine, or think there is a better alternative out there? many thanks, jason From stilwell23 from gmail.com Fri Oct 16 10:30:41 2009 From: stilwell23 from gmail.com (Velocifero) Date: Fri Oct 16 12:32:23 2009 Subject: [Zbrafish] Looking for groups that use zebrafish Message-ID: Good day, I am looking for a listing of as many (all) research groups that use zebrafish in their model. Does anybody have a suggestion on where I could find information like that? It would be much easier than randomly searching through all the groups I can find using a generic search. Very much appreciated, Scott. From j.burris from cellbio.duke.edu Fri Oct 23 12:44:54 2009 From: j.burris from cellbio.duke.edu (Jim Burris) Date: Fri Oct 23 12:50:28 2009 Subject: [Zbrafish] Biosecurity Measures Message-ID: <2D60DC9E-B935-47E2-BBF8-BC83BFDBF87D@cellbio.duke.edu> We have a policy the restricts entry into our facility by anyone who has been in another fish facility or had contact with fish from another facility within the last 24 hours. The idea is that people should have at least taken a shower and changed clothes before entering our facility. This policy was created to prevent the introduction of any pathogens that could be transported on a persons skin and clothing. I would like to know if other zebrafish facilities have a similar policy? If so, were there any specific reasons why this policy was implemented? Best Fishes, Jim Burris -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.bio.net/bionet/mm/zbrafish/attachments/20091023/2ad6442f/attachment.html From sbanerje from uni-koeln.de Thu Oct 29 09:08:48 2009 From: sbanerje from uni-koeln.de (Sanjita Banerjee) Date: Thu Oct 29 11:37:46 2009 Subject: [Zbrafish] zebrafish injections Message-ID: <1256825328.4ae9a1f0dc60b@webmail.uni-koeln.de> dear all, we are planning to purchase a new microinjection set-up apparatus for our lab. we currently have femtojet micromanipulator 5171 from eppendorf. and the microscope is from zeiss; stemi 2000. i am on the look-out for a manipulator which can make an axial movement; is injectman good? and additionally, i appreciate your input of a microscope which has light source from below. your suggestions will be of great help. thank you very much, sanjita